Chromatography Media
Cytiva Butyl-S Sepharose™ 6 Fast Flow Chromatography Media
The least hydrophobic medium in the Sepharose Fast Flow hydrophobic interaction chromatography (HIC) range and is particularly useful during the initial stages of purification process
Cytiva Q Sepharose™ High Performance Chromatography Media
Designed for high intermediate and polishing steps in downstream processing
Cytiva Capto™ Q Chromatography Media
Designed for capture and intermediate purification of proteins from large feed volumes. Cytiva CaptoTM Q Chromatography Media is a strong anion exchange BioProcess medium, designed to meet the demands of modern large-scale manufacturers.
Cytiva Capto™ Blue Chromatography Media
An affinity medium for capture of proteins and enzyme purification on large and small scale
Cytiva Q Sepharose™ XL
Hydrophilic base matrix ensures low levels of non-specific binding leading to low levels of host cell-derived impurities in elution pool
Cytiva HiTrap™ Capto™ PlasmidSelect
For the purification of supercoiled DNA to high quality for gene therapy and DNA vaccine applications
Pickering Laboratories Inc REAGENT 4X950ML CASE
Hydrolysis Reagent for Carbamate analysis 0.05 M, case of 4 (950 mL /bottle) EPA 531.1
Thermo Scientific Dionex™ AS29 Eluent Concentrate, Sodium Carbonate/Bicarbonate Concentrate (100x)
Save time and reduce preparation errors and contamination that may occur during eluent preparation with the ready-to-dilute Thermo Scientific™ Dionex™ AS29 Eluent Concentrate. For use with Dionex IonPac AS29-Fast-4µm IC columns, simply prepare eluent by diluting the concentrate in deionized water. The 250mL bottle of 100x concentrate is made with only high purity, reagent grade chemicals and water (18.2 MΩ-cm), and quality checked for ionic contamination. The concentrate contains verified concentrations of 0.45M carbonate and 0.20M bicarbonate.
Sorbent Technologies Inc Alumina, Basic, Super I, 50-200um, 500g
Alumina Basic Super I has a pH of 10, a particle distribution of 50-200um, and quantity of 500g. In a non-polar environment Alumina Super I shows adsorption capacity approximately twice as high as Alumina Activity I. Alumina Basic Super I has a Loss on Ignition (LOI) of 1% and a specific surface area of about 200 m2/g. The high activity level lends itself to the separation of polar samples in nonpolar solvent systems, specifically, the purification of solvents. Applications include: Alkaloids, Synthetic bases, dehydration of ethers, Removal of peroxides, Natural and synthetic dyestuffs, Hydrocarbons
Sorbent Technologies Inc Silica Gel, Technical Grade, 60A, 40-63um, 2.5kg
Silica Gel, Technical Grade is an economical choice for general separations and filtration. The silica gel has a porosity of 60A, particle distribution of 40-63um (230x400mesh), and a quantity of 2.5kg. This silica gel gives good chromatographic performance for general, non-critical separations. It is used for the packing of traditional flash chromatography columns.
Sorbent Technologies Inc Silica Gel, Premium Rf, 60A, 20-45um, 5kg
Silica Gel, Premium Rf has a porosity of 60A, particle distribution of 20-45um, and a quantity of 5kg. It is used as the stationary phase for Medium Pressure Liquid Chromatography (MPLC). Improve your resolution with this MPLC silica gel whether in the laboratory or in production. When working with difficult separations that give very low Rf-values on initial screenings by TLC and require larger volumes of flash grade silica, you need the improved resolution power that Sorbtech MPLC grades provide. By using a smaller particle size, a higher number of theoretical plates are achieved using the same volume of silica which in turn increases the resolution.
